Use A Hair Dryer To Remove Stubborn Dish Stickers (No Scraping Needed)

We have all bought a lovely new mug or plate only to find a price tag plastered right in the middle of it. It is such a buzzkill when you get home. You try to pick at it with your fingernail but it just shreds into tiny white layers and leaves that gross sticky residue behind. I used to soak them in the sink for hours but I finally found a trick that gets the job done in under 15 minutes and works like magic every time.

Why Scraping Creates A Mess

Price stickers on a mug in a store.
Photo Credits: PAUL ELLIS / AFP / Getty Images
Photo Credits: PAUL ELLIS / AFP / Getty Images

I think our first instinct is always to grab a butter knife or just use our fingernails to attack the sticker aggressively. But that usually ends in disaster. You end up with a half removed tag and a bunch of paper fiber stuck to the glue. Plus, if you are not careful, metal tools can actually leave permanent gray scratches on your nice new porcelain. It turns a ten second job into a ten minute scrubbing session that ruins the finish of your brand new bowl.

ADVERTISEMENT

Grab Your Hair Dryer

ADVERTISEMENT
Hair dryer on a wooden background.
Photo Credits: stockfilmstudio / Envato Elements
Photo Credits: stockfilmstudio / Envato Elements
ADVERTISEMENT

The secret weapon is actually sitting in your bathroom drawer right now. A standard hair dryer is the perfect tool for the job because it delivers concentrated heat exactly where you need it. You do not need a fancy industrial heat gun for this to work. Any basic blow dryer will do the trick. Just plug it in near your kitchen counter and make sure the cord can reach your stack of dishes comfortably. It is safer than boiling water and much less messy than using oil.

ADVERTISEMENT

Applying The Heat Correctly

ADVERTISEMENT
ADVERTISEMENT
Heating a sticker on the bottom of a mug with a hair dryer.
Photo Credits: ManMade DIY
Photo Credits: ManMade DIY
ADVERTISEMENT

Turn your hair dryer on to the highest heat setting available. You want to get the adhesive hot enough to melt so just ignore the cool setting. Hold the nozzle about two or three inches away from the sticker. You do not want to touch the sticker directly with the dryer, but you want to be close enough that the airflow is intense. Keep the air focused right on the center of the tag to make sure the heat distributes evenly.

ADVERTISEMENT

Hold It

ADVERTISEMENT
ADVERTISEMENT
A hair dryer being used to heat up a price sticker on a mug.
Photo Credits: ManMade DIY
Photo Credits: ManMade DIY
ADVERTISEMENT

This is the part where you need just a little bit of patience. Hold the dryer in place for about forty five seconds to a full minute. It might feel like a long time, but you are waiting for the physics to happen. You might see the edges of the paper start to curl up slightly which is a great sign. If the sticker is particularly large or old, give it an extra thirty seconds just to be sure the glue is softened.

ADVERTISEMENT

The Satisfying Peel

ADVERTISEMENT
ADVERTISEMENT
Peeling a sticker off of the bottom of a mug.
Photo Credits: ManMade DIY
Photo Credits: ManMade DIY
ADVERTISEMENT

Turn off the dryer and set it down safely. Immediately use your fingernail to gently lift one corner of the sticker. Be careful because the dish itself might be a little hot to the touch. If you heated it enough, the entire sticker should lift off in one smooth piece. It is honestly the most satisfying feeling to see it come away cleanly without ripping. If it starts to tear, just hit it with the heat for another ten seconds and try again.

ADVERTISEMENT

Wiping Away The Residue

ADVERTISEMENT
ADVERTISEMENT
A person using a damp paper towel to wipe off any reside.
Photo Credits: ManMade DIY
Photo Credits: ManMade DIY
ADVERTISEMENT

Sometimes even with the perfect heat method you might see a tiny faint outline of residue left on the ceramic. Do not worry about scrubbing it. Since the glue is still warm and soft, it usually wipes right off. Just take a damp paper towel with a drop of regular dish soap and give it a quick swipe. The warmth makes the adhesive release instantly. It is much easier than trying to scrub cold hard glue off a plate under cold water.

ADVERTISEMENT

Saving Your Manicure

ADVERTISEMENT
ADVERTISEMENT
The bottom of a mug with no sticker.
Photo Credits: ManMade DIY
Photo Credits: ManMade DIY
ADVERTISEMENT

The best part about this method is really just saving your hands. I cannot tell you how many manicures I have ruined trying to pick price tags off of gifts. By letting the heat do the hard work, you save your nails and your sanity. It turns an annoying chore into a weirdly fun little task. You will honestly start looking around the house for other stickers to peel just because it feels so good to get them off so perfectly.

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT

Related Articles

ADVERTISEMENT

-How To Tell When It's Finally Time To Replace Your Bath Towels

-How To Get Wrinkles Out Of Your Clothes Without Using An Iron

-How To Clean Bricks With Vinegar — The Easy, Natural Way

It is funny how we complicate things when the simple solution is usually the best one. I hope this little trick saves you some frustration the next time you come home with a haul from the home goods store. Your dishes will look perfect and you will not have to spend your evening soaking them in the sink. Enjoy your new kitchen finds without the sticky headache.