04953

Sep 17, 2020

# How to Divide Any Board into Equal Parts without Fractions or Complicated Math

If you do woodworking and DIYing in inches, a solid understanding of fractions is essential. Being able to calculate that half of 4 1/4" is 2 1/8", or that 1 1/2 + 1 3/16 = 2 11/16" is basic shop math that will keep your projects moving quickly.

But often, bringing fractions into the process is, well, completely unnecessary. Let's say you have a board that you'd like to divide into equal parts. You could measure it, then bust out a pencil, paper, and the calculator app, and eventually have to Google a decimal-to-fraction converter to figure out the size of each section. Then, you'd have to find that crazy number on your ruler, and carefully add the units together to mark out your parts. Or... you could just do this.

04686

Sep 09, 2020

# 7 Common Mistakes to Avoid Whenever You Use a Random-Orbit Sander

The random orbital sander is one of the first tools any maker or DIYer should own. In fact, I can't think of another powered tool that I use more, on nearly every project involving wood. The design is simple, and right there in the name - they move, in a random circular pattern, to sand wood.

A huge improvement over its predecessor, the pad or orbit sander, these guys use special shaped sandpaper disc to get your project smooth fast and with minimum swirl marks. Well, at least faster than sanding by hand, and with much less energy. But with great power comes great...opportunity to mess things up. These wondertools work, but there are

04944

Sep 03, 2020

# Everything You Need to Know Before You Build Your First Workbench

One of the great conundrums of woodworking is this simple fact: you need a workbench to build a workbench.

In fact, in order to build a proper workholding system replete with vises, rock-solid joinery, and a sturdy wood top, you also need a complete shop full of power tools to mill the wood to size, a fleet of clamps to laminate the top, and tons of experience to know how to use all that stuff in the first place. And to build it from hard maple or other appropriate wood, it'll cost at least \$700 for the lumber alone.

04946

Sep 02, 2020

# Fixing Up a Vintage Workmate Portable Workbench

I am grateful to have a dedicated workshop in our basement. It's a great place to both work on projects, and store tools and materials. And while my shop time is super important, there are a few things even more precious to me. Like my family.

So, I'm interested in learning more about some smaller wood projects that I can do in the evenings during family time. Projects like carving, whittling, and other non-furniture making projects that I can do while we watch a movie or reading time in the common areas.

So, I hit up Craigslist, and found this older model Workmate for a mere \$10. And, in an afternoon, I turned it into a portable space to get creative and start making some chips... no noise or sawdust required.

04956

Aug 31, 2020

# How to Drill, Saw, Plane, or Do Almost Anything Straighter

Stationary power tools are often the most full-proof way to do a job. They're anchored to the floor or bench, and come with flat tables and fence systems so you can guarantee your cuts, holes, and other bits of shaping are square and straight.

But, besides being expensive, they're not always the right tool for the job. So, instead we turn to handheld tools, both electric and manual, to get things done. And therein lies the rub - human beings are not machines. Try as we might, we often can't do something with our hands as straight or square as a large stationary tool.

Besides using guides and other accuracy aids, there's a super simple and easy trick you can add to your mental toolbox to help guide the tool to do its best.

04917

Aug 04, 2020

# How to Enlarge a Hole in Wood without Ruining Your Project

To the non-DIYer, dedicating an entire blog post to this process may seem like overkill. But anyone who wields their cordless drill on the regular can attest: the issue of making an existing hole larger comes up all. the. time. Whether repairing something around the house, replacing a part or piece of hardware, or just because you didn't quite get it right the first time, any maker, woodworker, or generally handy person knows how frequently one needs to enlarge a hole, and how surprisingly difficult it can be to pull off.

04935

Jul 31, 2020

# How to Find the Center of Any and Every Circle

Often, when it comes to DIY projects, we create our own circles by starting from a center point. Whether a compass, string guide, or specialized cutting jig, a circle emerges from our pencils or saws precisely because we've created an established and consistent distance from a single origin.

But, what happens when the shape already exists, and you need to know how to find the center of a circle? You can do it in less than a minute without any specialized math, memorizing a formula, or even knowing what pi is.

04912

Jul 20, 2020

# ManMade Recommended: This is, Hands Down, the Best Dust Mask for Woodworking

Hopefully, you're already a committed safety glass wearer. Grabbing a pair for even the simplest drilling/driving task is good practice, and a part of your DIY routine. Even better, if you use power tools, you're also protecting your hearing from those roaring 85-90 dB motors.

Last in that great triumvirate, and perhaps the most often overlooked, is protection for your respiratory system. Too many of us don't wear a dust mask, respirator, or sealed face shield when working on projects for one simple reason: they are extremely uncomfortable, a total hassle, and more irritating than your second cousin's toddler at the Thanksgiving table

04860

Jun 15, 2020

# How to: Make a Chisel Holder Rack in Under an Hour

Chisels are probably the simplest of all woodworking tools, yet versatile enough that you'll likely use them on every project. To maintain the best cutting edge, they should be cared for and sharpened regularly: ground, honed, and polished until there's a razor fine edge that cleanly slices through the wood fibers.

So, why have mine been just sitting in a box for the last year and a half? I actually don't have an excuse. I mean, lack of proper storage is the answer, but why I haven't done anything about it since I finished my workshop build in late 2016... I really can't justify it.

So, over the weekend, I decided to do something about it, and built a simple chisel holder and hand tool rack to keep things organized, within reach, and to protect those finely honed edges. The design is adaptable enough that you can make one of any size, and put the whole thing together in under an hour.

04775

Jan 29, 2020

# How to: Make a Proper Cup of Builder's Tea

If you were to ask an American to picture drinking a cup of tea, it's safe to assume that the mental image wouldn't include work boots, hardhats, bricks, and lumber. But while coffee is standard in the U.S., for thousands of construction workers in Great Britain and Ireland, as well as numerous tradesmen like electricians, welders, and plumbers, a strong cup of tea is the preferred fuel for a day filled with labor.

Here's a basic rundown of how to fortify your work day with the strength of a bricklayer.

04967

Nov 07, 2019

# How to Make an Heirloom Carving Board

It happens every year. I'll spend a couple days reading old November issues of my favorite cooking magazines and pouring over the food blogs to come up with our Thanksgiving menu. I'll make a plan, shop way ahead of time, and spread my prep work out over the three days prior. Come Thursday, there will be an established timeline, and it will be executed to a T. And when the sides are ready, the turkey will be out of the oven and well rested to keep the juices in. I'll go to carve it, and inevitably, I'll say to myself:

Crap. I forgot that I do not have a work surface on which to properly take this thing apart.

I have cutting boards. Nice, thick, end-grain hard maple butcher blocks that I made myself. But they were designed for chopping vegetables, which are relatively dry, and not carving a turkey, which (if you cook it right) is very, very moist. Those juices will flow, and saturate any number of kitchen towels, and make a huge mess, covering my hands in poultry drippings to the point that I can no longer safely grip the knife and everything goes slippery, sliding (but flavorful) chaos.

It happens every year. I say to myself, "I really ought to make a proper carving board." And this year, I decided it was finally time.

So, here's how to make a diy cutting board yourself. Once you have the materials, it's only 90 minutes of work, and will last for many, many holiday seasons to come.

04958

Oct 23, 2019

# How to: Make a Set of Custom Wooden Cufflinks

For most men, cufflinks are one of those accessories that are seldomly used, but when you need 'em, you need 'em.  You can buy custom cufflinks from anywhere between  \$20 to hundreds of dollars…or, you can make your own masculine, custom cufflinks for \$5.  This is an incredibly simple project that took about 25 minutes to make and, if I may say so myself, they look pretty great.

04951

Oct 10, 2019

# How to Sharpen and Care For Your Axe

Fall means many things. Most important among them: firewood season. Whether building a campfire in a stone ring for cooking, heating your space via a woodstove, or just setting your indoor fireplace ablaze for some warmth, these next six months are all about the cheer that can only come from the presence of an open flame.
So, as we settle into the new half of the year, let's take a moment to address humankind's most primitive tool: the axe. Whether your splitting whole tree rounds, dividing logs into kindling, or getting creative with woodcarving, the process is simple, and only needs to happen once a year for the average non-lumberjack. Here's how to sharpen an axe.

04934

Sep 10, 2019

# 10 Projects You Can Make with Scrap Wood

From every project I’ve ever made, I always have a small amount of left over lumber or scrap wood from cuts that needed to be make. I have a feeling that I’m not alone in that category. Many times, those small pieces or scraps sit in the bottom of my wood pile for months or even years until I find a need for them.  Eventually, I'll working on a project that needs a small piece of walnut, oak, pine, etc. and that’s when I am thankful I kept those small pieces of lumber.  But! Those scraps don’t always need to sit on the shelf until you need them for the next big build.

There are also masculine, scrap, and easy projects that make great use of your scrap lumber.  Here are ten of our favorites:

04672

Jul 30, 2019

# How to Drill Better, Cleaner Pocket Holes

Pocket hole joinery has a lot going for it. An affordable jig makes the process fool-proof, it comes together in less than a few minutes, and the joint itself is super strong.

The Kreg jig itself does most of the work, but a little knowhow makes the pocket hole clean and precise. This is especially important if the pocket hole will be visible, plugged, or filled.

Ready to make nice, sharp pocket holes? Let's go!

03819

Jul 10, 2019

# 5 Table Saw Jigs Every Woodworker Should Have

I spend quite a bit of time setting up for projects on the tools. It’s amazing how much time it takes to make a few simple yet complex cuts. For the type of cuts that happen often, it makes sense to make a few go-to jigs to help with those annoying set-ups.

02980

Jun 21, 2019

# Weekend Project: Make a Sturdy Wooden Toolbox from Scratch

This weekend project is full of all the good stuff: it's practical, it's customizable, and it's a great way to practice and further your woodworking skills...with the very tools you'll store in it. The circle is closed.

04864

Dec 18, 2018

# How to Easily Calculate Board Feet

The first time you go to the lumberyard can be a little overwhelming if you don’t know what you’re doing.  Even if you think you know what you’re doing, all the different species of lumber, the different dimensions of the lumber, different locations within the lumberyard, etc. can seem daunting for finding the perfect piece for your project.  With just a little bit of simple math, one area where you can be totally confident is calculating the cost of your chosen board.

Most home centers sell lumber by the linear foot, which means that the price of the board is determined by the length of the board. You pay a little extra for the convenience of a home center and you likely aren’t getting the best piece of lumber.  The lumberyard, on the other hand, sells their lumber by the board foot.  A board foot takes into consideration the thickness, width and length of a board.  There are several apps board foot calculator apps to help you figure out how many board feet are in your chosen piece, but all you need to remember is one simple formula and you can calculate board feet anywhere.

04641

Dec 17, 2018

# The 1-Second Trick to More Accurate Measuring and Marking for Your Woodworking Projects

If you want gap-free joinery and a perfect, long-lasting fit for both strength and aesthetics, precise measuring and marking of parts is essential. But, each step of the process — measuring, transferring marks, and cutting — can introduce tiny little errors of 1/64 or 1/32", which, over the course of a project, can add up significantly. So here's a simple little trick that takes no extra time, but creates much more accurate results.

04718

Dec 03, 2018

# How to Cut a Perfect Circle with a Jigsaw

A quality jigsaw is one of my favorite tools, and a seriously good DIY best buy. Armed with the right blade, you can cut all sorts of materials into nearly any two-dimensional shape you please. And most-importantly, do it safely.

But it's flexibility as a creative tool is also its liability. Like a pencil, it can go in any direction, but in the hands of a human being, those directions will never be without the marks of our innate imperfection. Straight lines can be accomplished with a fence, but a perfect circle. You can't draw one by hand, so don't expect yourself to be able to jigsaw one either.

At least, not without a little help.