04934

Sep 10, 2019

10 Projects You Can Make with Scrap Wood

scrap wood projects

From every project I’ve ever made, I always have a small amount of left over lumber or scrap wood from cuts that needed to be make. I have a feeling that I’m not alone in that category. Many times, those small pieces or scraps sit in the bottom of my wood pile for months or even years until I find a need for them.  Eventually, I'll working on a project that needs a small piece of walnut, oak, pine, etc. and that’s when I am thankful I kept those small pieces of lumber.  But! Those scraps don’t always need to sit on the shelf until you need them for the next big build.

There are also masculine, scrap, and easy projects that make great use of your scrap lumber.  Here are ten of our favorites:

Continue Reading

04672

Jul 30, 2019

How to Drill Better, Cleaner Pocket Holes

Pocket hole joinery has a lot going for it. An affordable jig makes the process fool-proof, it comes together in less than a few minutes, and the joint itself is super strong.

The Kreg jig itself does most of the work, but a little knowhow makes the pocket hole clean and precise. This is especially important if the pocket hole will be visible, plugged, or filled.

Ready to make nice, sharp pocket holes? Let's go!    

Continue Reading

03561

Jul 17, 2019

How to: Make a Fold-Away BBQ Table and Grilling Cabinet

created at: 04/03/2015

This great project keeps all the basic grilling supplies close at hand, but out of the weather when the fun is done. With a large preparation space and room for the essentials it’s a great upgrade for the outdoor chef.  

Continue Reading

03819

Jul 10, 2019

5 Table Saw Jigs Every Woodworker Should Have

taper Cutting jig

I spend quite a bit of time setting up for projects on the tools. It’s amazing how much time it takes to make a few simple yet complex cuts. For the type of cuts that happen often, it makes sense to make a few go-to jigs to help with those annoying set-ups.  

Continue Reading

04838

Jul 08, 2019

How to: Make a One-Hour Walnut Cutting Board

Cutting board cover

There are numerous cutting board kits out there that provide you the wood and leave all the gluing, planing and cutting to the consumer.  You can also cut up random pieces to create your own glued up cutting board. Both of those options and can result in a gorgeous cutting board that will be adored by the recipient; however, that also requires buying or making several pieces that need to be glued together, a planer and loads of extra time.  The simple solution – find a beautiful piece of solid wood that you can make into a cutting board.  Using one solid piece of walnut, maple or the hardwood of your choice will be cheaper, less time

Continue Reading

04866

Jul 05, 2019

How to: Remove a Dent from Wood

Have you ever been substantially complete with a wood project and then accidently dropped it or knocked it off your workbench?  Without a doubt, your box, picture frame, cutting board or whatever you’re working on will get dinged or dented.  Despite the fact that those mishaps can often be fixed, it can be incredibly frustrating and require a significant amount of time to remove or hide the blemish.  Instead of sanding, planing or recreating that piece of the project, there is another simple and often less time-consuming option you likely have in your closet. 

Continue Reading

02980

Jun 21, 2019

Weekend Project: Make a Sturdy Wooden Toolbox from Scratch

This weekend project is full of all the good stuff: it's practical, it's customizable, and it's a great way to practice and further your woodworking skills...with the very tools you'll store in it. The circle is closed.    

Continue Reading

03482

Apr 19, 2019

Weekend Project: Make a Wooden Chair from One Board (for $8!)

At its core, a chair is simply a seat with a back. And while they often have legs and arms and complex joinery for strength, sometimes, a little physics can accomplish the same thing.    

Continue Reading

04254

Apr 03, 2019

9 Awesome Podcasts for Makers, Crafters, Artists, and Designers

created at: 05/26/2016

Podcasts. You know 'em. You listen to 'em. You're moved by them. You laugh and are entertained by them. But are you inspired by them? Do they light a fire under your butt and make you want to get into your work space as fast as possible? Do they make you want to complete your workout faster so you can get home and make stuff? Do they make you thankful for your creative bent, and the creative work of others?   

Here's our thinking: podcasts, as a medium, are great accompaniment for a lot of things. There are certain podcasts you listen to on your commute, specific shows that work best for cleaning the house or cooking dinner, those to

Continue Reading

02927

Feb 06, 2019

How to: Make a Custom, Heavy Duty Tool Roll to Carry Your Tools Anywhere

95% of the time, a tool box is overkill. Whether taking some items to help a friend with a project, or just working on something in my own home two floors above my basement shop, the act of dragging out the toolbox, selecting the items from the pegboard and arranging them appropriately, and then lugging the whole thing around is simply unnecessary. 

Continue Reading

04532

Dec 31, 2018

Make This: Leather + Walnut Cutting and Serving Board

Small Walnut cutting board  - how to make one

There are plenty of times when a small wooden board is all you need to set out or serve something when entertaining. And it's even better when they look awesome and make whatever you're sharing look that much tastier. If you have a few scraps of hardwood (like walnut) lying around after a project, this is exactly what you should do with them: make a walnut cutting board!

Continue Reading

04530

Dec 27, 2018

Let's Talk: What's the Best Gift You Received (or Gave) This Holiday?

Every holiday season, sites like ManMade spend all kinds of effort doing our best to help you find meaningful, quality gifts that you'll be proud to give someone. Or, at least, that you can add to your wishlist and let those in your life know you'd love to unwrap yourself.

But once the gift guides are published, we never seem to revisit those things until the following year. So, today, during this week after Christmas, I thought I'd ask — Did you get anything cool for Christmas? Or give something that particularly excites you that we should all know about?   

Continue Reading

04864

Dec 18, 2018

How to Easily Calculate Board Feet

The first time you go to the lumberyard can be a little overwhelming if you don’t know what you’re doing.  Even if you think you know what you’re doing, all the different species of lumber, the different dimensions of the lumber, different locations within the lumberyard, etc. can seem daunting for finding the perfect piece for your project.  With just a little bit of simple math, one area where you can be totally confident is calculating the cost of your chosen board.

Most home centers sell lumber by the linear foot, which means that the price of the board is determined by the length of the board. You pay a little extra for the convenience of a home center and you likely aren’t getting the best piece of lumber.  The lumberyard, on the other hand, sells their lumber by the board foot.  A board foot takes into consideration the thickness, width and length of a board.  There are several apps board foot calculator apps to help you figure out how many board feet are in your chosen piece, but all you need to remember is one simple formula and you can calculate board feet anywhere.

Continue Reading

04641

Dec 17, 2018

The 1-Second Trick to More Accurate Measuring and Marking for Your Woodworking Projects

If you want gap-free joinery and a perfect, long-lasting fit for both strength and aesthetics, precise measuring and marking of parts is essential. But, each step of the process — measuring, transferring marks, and cutting — can introduce tiny little errors of 1/64 or 1/32", which, over the course of a project, can add up significantly. So here's a simple little trick that takes no extra time, but creates much more accurate results.    

Continue Reading

04512

Dec 07, 2018

Holiday How-to: Make DIY Wooden Gift Tags from Scrap...in Under 15 Minutes

Giving gifts? It's the best, right? Not cheap plastic things, and certainly not gift cards. But thoughtful custom - and most of the time handmade gifts - that I know someone will enjoy for years to come. Take a look at our list of 50 gifts for men here, and gifts for women here.

Of course, the gift has to be wrapped in something special as well. So, why would I want to use lame paper gift tags from the discount store after all that work? Here is a simple project to make some name tags that are as thoughtful as the gift.   

Continue Reading

04721

Dec 05, 2018

DIY Gift Idea: Make Your Own Wood-Infused Booze

As far as holiday gifts go, it's hard to beat something to sip. And this year, you can do a little better than swinging by the grocery store and grabbing a bottle of wine. 

This wood-infused project only take a tiny bit more work than buying something from the liquor store, but boosts all kinds of flavor benefits and handmade points, turning the spirits into a proper gift. 

Make some in bulk for everyone you know, and your holiday shopping is done.    

Continue Reading

04718

Dec 03, 2018

How to Cut a Perfect Circle with a Jigsaw

A quality jigsaw is one of my favorite tools, and a seriously good DIY best buy. Armed with the right blade, you can cut all sorts of materials into nearly any two-dimensional shape you please. And most-importantly, do it safely. 

But it's flexibility as a creative tool is also its liability. Like a pencil, it can go in any direction, but in the hands of a human being, those directions will never be without the marks of our innate imperfection. Straight lines can be accomplished with a fence, but a perfect circle. You can't draw one by hand, so don't expect yourself to be able to jigsaw one either. 

At least, not without a little help.    

Continue Reading

04969

Nov 26, 2018

How to: Add Additional Lighting to Your Workshop

tools and suppliesHave you ever tried to do any woodworking, leather working, metal working or anything else in your shop if it’s dimly lit?­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­  It’s hard to see cut lines, find your tools and it can be really unsafe while you’re trying to make any cuts.  My garage, which doubles as my workshop, only had two lights in the center of the structure.  Those two lights probably would have been adequate if they were directly over my working area, but with them being in the center of the garage I wanted more light.  In order to get that extra light, I had two simple options: 1.) get brighter bulbs for the two

Continue Reading

04967

Nov 19, 2018

How to Make an Heirloom Carving Board

diy cutting board for carving a turkey

It happens every year. I'll spend a couple days reading old November issues of my favorite cooking magazines and pouring over the food blogs to come up with our Thanksgiving menu. I'll make a plan, shop way ahead of time, and spread my prep work out over the three days prior. Come Thursday, there will be an established timeline, and it will be executed to a T. And when the sides are ready, the turkey will be out of the oven and well rested to keep the juices in. I'll go to carve it, and inevitably, I'll say to myself:

Crap. I forgot that I do not have a work surface on which to properly take this thing apart.

I have cutting boards. Nice, thick, end-grain hard maple butcher blocks that I made myself. But they were designed for chopping vegetables, which are relatively dry, and not carving a turkey, which (if you cook it right) is very, very moist. Those juices will flow, and saturate any number of kitchen towels, and make a huge mess, covering my hands in poultry drippings to the point that I can no longer safely grip the knife and everything goes slippery, sliding (but flavorful) chaos.

It happens every year. I say to myself, "I really ought to make a proper carving board." And this year, I decided it was finally time.

So, here's how to make a diy cutting board yourself. Once you have the materials, it's only 90 minutes of work, and will last for many, many holiday seasons to come. 

Continue Reading

04581

Nov 18, 2018

How to Install and Mount a Vise without Drilling Holes in Your Workbench

My first "workbench" was a simple table-style surface. 2x4 legs, 1/2" plywood top, held together with black drywall screws. I built it in my first apartment when I was twenty-two, with my first (and only) power tools: a circular saw and a drill. 

In the back left corner, I mounted a shiny, new, bright blue Irwin swiveling bench vise. It was awesome to have it there when I needed it - holding metal stock and angle iron for cutting, helping me bend rod and pipe, even keeping dowels and small wood parts in place while working on them. Unfortunately, these activities constituted a very small amount of the projects I was doing, and mostly, the vise just got in the way during the other 97% percent of tasks.

So, for the past few years, that vise has just been in a storage crate, and I get it out and try to hold it in place when I need it. Which, in case you can't guess, does not work. Ever. So, I wanted to come up with a solution that would allow me to install a machinist's style swiveling benchtop vise, without having to permanently install it, or drill holes in my benchtop and have to thread and tighten nuts and bolts every time I use it.    

Continue Reading