04654

Jul 27, 2017

ManMade Recommended: You Need to Get Your Hands on these Sandflex Rust Erasers

Earlier this week, for the Fourth of July holiday, some friends and I decided to try our hands at roasting a whole pig. We were cooking for 60-80 people, and wanted to do something more special than hamburgers and hot dogs, and figured: well, if we're going to try it, now is as good of a time as any. 

We wanted to go with a Southern United States-style "pig picking," meaning lots of wood smoke, and cooking over low and slow temperatures. In order to get the whole animal ready to eat with such a gentle heat, we needed to start the night before. And that's where this story begins.   

Continue Reading

04663

Jul 26, 2017

Minimalist DIY: What's Happening Halfway into My 30-Day Workshop Purge

I've heard it said that minimalism isn't really about "getting rid of stuff", it's about refining it down to the "right stuff". I'm halfway through a 30-day shop purge and I have a few lessons learned, a few personal reflections, and a lot more space. 

Continue Reading

02363

Jul 19, 2017

How to Make a DIY Vintage-Inspired Sawhorse Trestle Desk

When I came across this awesome vintage-inspired trestle desk this week, it struck all my favorite things: warm wood tones, a modern industrial vibe, and nothing extraneous, just a nice big surface and some shelves. It was "inspired by an antique French architect's table," and it's just all kinds of industrial cool. 

Except there's one problem...   

Continue Reading

04649

Jul 19, 2017

How to Build a Modern Coffee Table from Scratch

Editor's Note: This project is an excerpt from the new book The Art and Craft of Wood: A Practical Guide to Harvesting, Choosing, Reclaiming, Preparing, Crafting, and Building with Raw Wood by Silas J Kyler and David Hildren. The book is available now at your favorite local bookstore, Powell's, or Amazon. Thanks to Quarry Books for sharing this project with us. 

Building furniture is what first drew me to woodworking. The first coffee table I ever made was for my mom. It was a surprise gift, and I worked tirelessly, hour upon hour, to create something I was proud of. I remember the unveiling well, and the joy it gave her was well worth all the hard work.

The projects to this point have been small and technically much easier than building a piece of fine furniture. Going from making a serving tray or lamp to a coffee table may feel like a big step, and in many ways it is, but practicing with small projects gives you all the skills you need to approach a simple piece of furniture. Remember: with a good dose of patience, you will be well on your way to creating beautiful furniture.

I had a particular set of mesquite slabs in mind when envisioning this coffee table. The tree came from my neighbor’s front yard. When it was removed, they simply asked the crew to leave the trunk behind for me to gather. As I was giving this tree a new life, I could step outside my shop, look across the alley, and see where it lived and died. I could also see where the logs sat and seasoned for two years, driving my wife crazy.    

Continue Reading

03762

Jul 16, 2017

ManMade Essential Toolbox: The Best Combination Square for Woodworking... and Why You Definitely Need One

The best combination square will quickly become essential in your shop. ManMade is sharing our picks for the essential tools we think every creative guy and DIYer needs. We've selected useful, long-lasting tools to help you accomplish a variety of projects, solve problems, and live a hands-on lifestyle that allows you to interact with and make the things you use every day.

Best combination square

The saying goes, "Measure twice, cut once." So does that mean that the layout and setup process is twice as important as the sizing and milling? Absolutely. In fact, it may be more like three or four more times. Any person who's completed a full-on woodworking

Continue Reading

04658

Jul 16, 2017

How to Make the World's Easiest Clamp Rack

diy clamp rack

A functioning clamp rack. Every shop's gotta have one. "But, wait!" You say. "Isn't the easiest way to hold clamps just some 2x4s bolted to the walls, and maybe some holes and plumbing pipe inserted to hang the clamps on?" Yeah, perhaps. But, while that works if you have a ton of space, it's not the most efficient way to store clamps in a small shop. And I think of that as more of a "clamp hanging spot" than a proper organization system. Plus, if you already know about that trick, you certainly don't need me to give you a how-to. 

Instead, I present this clamp rack design: infinitely adaptable to any scale, and able to hold almost any type of clamp. You can build the whole thing with some scrap plywood, a jigsaw, and drill, and make one - no matter the size - in well under an hour.    

Continue Reading

04651

Jul 13, 2017

Minimalist DIY: Taking on a 30-Day Workshop Purge

I hit my head hard a few days ago. It hurt. A lot. It was one of those moments when the pain made everything else just fade away for a moment; then it came flooding back. I was leaning over a pile of things I've moved too many times to count, and I slipped a bit and made solid contact with the equally solid cast iron top of my table saw. In that moment I uttered a familiar phrase "I need to get rid of this stuff" in a much more, uh, guttural vocabulary. I needed a change. I needed space.

And so, my 30 day minimalist shop challenge begins.   

Continue Reading

03836

Jul 11, 2017

ManMade Essential Toolbox: In Praise of the High-Quality Screwdriver Set

created at: 08/26/2015

Let's be clear: none of us are here to discuss the basics of what a screwdriver is, or what it can do. Its purpose is clear. It's right there in the name.

Nor is it important to name all the different varieties of tasks it can perform. Because it can't do much.  If you use them properly, they're not a paint can opener. They're not a punch, or a chisel, or a pry bar. They do two things: tighten hardware, and loosen hardware. 

Continue Reading

04375

Jul 07, 2017

How to: DIY Wooden Bottle Openers From Scrap

I've had a small piece of scrap black walnut in the shop for a while. It was perfect to make a few simple bottle openers. Take a look.  

Continue Reading

04653

Jun 24, 2017

How to Make a Parallel Jaw Clamp Rack

When I finished my basement workshop makeover earlier this year, I couldn't have been more excited, or proud, about how far it'd had come. What was once two dark, dingy rooms full of plumbing pipes, exposed studs, and our family's household junk, was now a bright, clean, inspiring single workspace full of tools and materials. But to get it to that condition was a ton of work, and the truth is, my house still hasn't totally recovered. Examples include, but not limited to, the plywood sheets stored in the guest bathroom, the dust collector in the hallway, and the piles of clamps in our home office.

Oh, those clamps. They've been all over the lower level of our house for nearly six months. I used them for projects, of course, but mostly, they just stood against the wall or inefficiently piled on the floor, falling down every so often, scraping the paint as they went and startling all of us in the process.   

Continue Reading

04650

Jun 22, 2017

The Easiest Way to Get Perfectly Spaced Marks for Your DIY and Woodworking Projects

Proper and accurate measuring and layout are key to a great looking project. When you're dealing in whole numbers, that's easy enough. But the smaller you divide those inches or millimeters, math becomes more complicated, and the likelihood of making a mistake increases. While we can't always avoid finding common denominators and doing sophisticated shop calculations, when you're trying to lay out evenly spaced marks, you actually don't need math at all.    

Continue Reading

04642

Jun 19, 2017

Awesome Video of the Day: A Mesmerizing Journey through the Center of a Tree

Cutting open a log or thick board is one of the most rewarding feelings a DIYer or woodworker can experience. Who knows what the grain will look like? Who knows if you'll find a burl, a beautiful sapwood/heartwood transition, or a knot you'll be proud to feature, not hide? Beneath all that bark lies a world to be discovered, a geode of cellulose waiting to be explored.

Right? Well...sometimes. Or, you can split something open only to find punky, foamy wood, damage from bugs, or just boring, boring grain. 

Continue Reading

04251

Jun 16, 2017

How to: Build a Custom Rolling Tool Cabinet

created at: 05/23/2016 Rare is the craftsperson who couldn't use just a little more workspace. Maybe not more square footage (though I'd certainly take some), but perhaps more work surfaces to spread out projects, or some more storage to keep track of all the bits and pieces that come along with any technique.

Building this custom tool cabinet will certainly help.

Continue Reading

03186

Jun 15, 2017

How to: Build a Simple DIY Pegboard Shelf

created at: 09/23/2014

I love pegboard. I love organizing my workshop with it, I love using it in our office, I think it's cool when people do the Julia Childs-style pegboard pot rack thing...and I even like seeing it in store aisles, and noting all the clever and and adaptable industrial design things used to display items.

But...But! While pegboard is amazing for hanging stuff neatly on a grid, it does absolutely nothing for items without a hole in them. 

Continue Reading

03670

Jun 15, 2017

How to Make a Folding Farmhouse Table from Reclaimed Wood

Make your own folding farm table

On the side, my wife and I sell some of our handiwork at craft fairs, barn sales and vintage markets. When we got started, we had mostly folding plastic tables and white table cloths. And as you know, nothing, except maybe a grilled hot dog on a paper plate on the Fourth of July, looks its best on a folding plastic table and white table cloth.

Continue Reading

03708

Jun 14, 2017

7 Shop Essentials You Just Can't Have Too Much Of

7 Shop Essentials You just can't have too much of

My name is Bryson and I have a problem. Whenever I find myself in a hardware store I have a list and I have a second list. On that second, unwritten list, are the things I always tell myself I need for my shop and I inevitably walk out with a bag full of it.

Continue Reading

03767

Jun 12, 2017

How to Sell Your Handmade Stuff at a Craft Fair

created at: 07/22/2015

If you’re like me your DIY obsession can get so out of hand you have to start selling your stuff to fund more stuff! One of the ways my wife and I do it is setting up a booth at local festivals, barn sales and craft fairs. With a little bit of business savvy and DIY ingenuity, you too can start turning a profit on your passions.

 

Consider Your Investment
As you’re doing research on what fair or festival to do, count the cost of things like booth fees, ticket costs (if any), travel and food. After adding up all those costs make sure you have or make enough product to exceed those costs. If you all of those factors turn out to be a worthy

Continue Reading

03675

May 29, 2017

ManMade Essential Toolbox: How to Assemble the Perfect Set of Driver Bits

Here's our pick for the best impact driver bits. With this collection, you'll never be at a loss for the right bit for the job. 

Best impact driver bits

When is a drill not a drill? When it's a driver, used for securing hardware into material, rather than simply boring a hole into it. If you're anything like us, your cordless drill gets pressed into service much more often as a way to drive or remove fasteners than making holes with twist bits. And to get the most out of this versatile tool, you've gotta have the right bit for the job. Here's how to build a complete set of the best impact driver bits to allow you to take on any task.

 

Best impact driver bits

Quick-Change

Continue Reading

03736

May 23, 2017

Amazing Storage and Organization Solutions for the Small Workshop

Space-Saving Shop Projects

I work in a tiny, leaky, antique shed. Workspace is a precious commodity that keeps getting taken up by scraps and in-progress pieces and just plain junk.    

Continue Reading

04242

May 15, 2017

Seriously, This is the Best Way to Close a Paint Can

created at: 05/16/2016

It's a problem we can all relate to. Anyone who has ever opened a paint, finish, or stain can knows the problem: if you don't use it all, you have to close it again. Hammers provide too much direct force, and can bend the lid, the lip, or the can itself. A rubber mallet is better, but you could shoot paint or finish out at you, and you'll cover the mallet in the material, which could get transferred to another project. Plus, if you're like me, the mallet always seems to be in another room.

So...    

Continue Reading