A quality jigsaw is one of my favorite tools, and a seriously good DIY best buy. Armed with the right blade, you can cut all sorts of materials into nearly any two-dimensional shape you please. And most-importantly, do it safely.
But it's flexibility as a creative tool is also its liability. Like a pencil, it can go in any direction, but in the hands of a human being, those directions will never be without the marks of our innate imperfection. Straight lines can be accomplished with a fence, but a perfect circle. You can't draw one by hand, so don't expect yourself to be able to jigsaw one either.
At least, not without a little help.
Have you ever tried to do any woodworking, leather working, metal working or anything else in your shop if it’s dimly lit? It’s hard to see cut lines, find your tools and it can be really unsafe while you’re trying to make any cuts. My garage, which doubles as my workshop, only had two lights in the center of the structure. Those two lights probably would have been adequate if they were directly over my working area, but with them being in the center of the garage I wanted more light. In order to get that extra light, I had two simple options: 1.) get brighter bulbs for the two
My first "workbench" was a simple table-style surface. 2x4 legs, 1/2" plywood top, held together with black drywall screws. I built it in my first apartment when I was twenty-two, with my first (and only) power tools: a circular saw and a drill.
In the back left corner, I mounted a shiny, new, bright blue Irwin swiveling bench vise. It was awesome to have it there when I needed it - holding metal stock and angle iron for cutting, helping me bend rod and pipe, even keeping dowels and small wood parts in place while working on them. Unfortunately, these activities constituted a very small amount of the projects I was doing, and mostly, the vise just got in the way during the other 97% percent of tasks.
So, for the past few years, that vise has just been in a storage crate, and I get it out and try to hold it in place when I need it. Which, in case you can't guess, does not work. Ever. So, I wanted to come up with a solution that would allow me to install a machinist's style swiveling benchtop vise, without having to permanently install it, or drill holes in my benchtop and have to thread and tighten nuts and bolts every time I use it.
Halloween has its horror and December its infinite loop of sparkle-strung classics. Good or bad, they're the established traditions of their seasons.
But, if you will, allow me to make the case as November as perhaps the prime month for festive film watching. We can't all relate to being chased by ax murderers nor having the carolers sing as we find our soulmate under the mistletoe just as the snow starts to fall outside. But everyone knows the experience of returning home to break bread and spill gravy with family, or, perhaps, what it's like to strike out on your own for the first holiday not spent at your grandparents. The Thanksgiving table (and four days of being stuck in the same place) is the perfect setting for drama, comedy, and everything in between. Plus, all those sweaters. Here are our faves that get it right.
A traditional Moscow Mule is a classic, reliable in every way and a good way to unwind. But with it's fresh lime juice and other trappings, it's perhaps most enjoyed outside on a summer evening.
In fall, it's a good idea to change things up by adding a few variations to the traditional recipe, creating a twist best enjoyed this time of year: the Harvest Mule. It's supremely tasty, and is best enjoyed next to a roaring fire during the chilly fall weather. Based in whiskey and mixed with cinnamon and cider, the Harvest Mule is easy, and worthwhile, to make.
I get this question a lot, and it's my privilege to answer and help folks out. Whether its someone looking for a gift for a creative friend or family member, or a somebody just beginning their DIY journey, people simply want to know "what should I get?"
And so, here are my picks from some of my most recent conversations. They're all over the spectrum, but all are solid, go-to options that I can't imagine working without. I think you'll enjoy them too.
How did this not occur to me sooner? Take one of my favorite beverages, mix it with my other favorite beverage, add in some extra flavor and bit of time, and, well, the results speak for themselves.
Of course, there are coffee-flavored liqueurs out there. Kahlua is the most famous; it's based on rum, and tastes nice and sweet. But I like whiskey better than rum, and I want the complexity of a coffee liqueur, but not the inherent sweetness. By making your own, you can control quality of coffee, the amount of sugar, and the whole experience and overall flavor profile is totally a step up. And, it takes, like, five minutes.
So... I like this project. I really like it, and I'll tell you why. First, it's made entirely from off-the-shelf parts from the home center. Then, because the parts are readily available, the only tool you need to make the entire thing is a cordless drill, which is awesome. And lastly, the attention
Have you ever marked out a board, went to cut, and re-checked your measurements after hearing the words "Measure twice, cut once" echo in your ears? It's remarkable how nuggets of shop wisdom can stick with you and save you a ton of trouble on a project.
At ManMade, we're big on collecting aphorisms, witticisms, and maxims that deliver helpful lessons in tidy packages. Sometimes, they're just what we need to stay productive, and get motivated to try something new. So, we're providing a few of our favorite in the form of free downloads: printable artwork to hang in your home, office, or wherever you create your DIY projects.
Unless you're a millionaire, I always recommend going with used hand tools when getting started in woodworking. (Though, full disclosure, no millionaires have yet to ask my advice.) Vintage tools are plentiful, much less expensive, and depending on their age, usually a better, longer-lasting tool than you can buy at your local big box store. And the best part? Antique tools are more likely to be made in the USA or Europe, where they've been crafted from higher quality steels than modern tools from the home improvement center.
Over the weekend, I found this nice, broad 1 1/2" chisel at a favorite antique mall, with a mere $7.50 on the price tag hanging from the handle. It was in mostly great condition. The top and back had been coarsely ground a few times, and the bevel wasn't square to the sides, but the steel was in beautiful shape and the handle looks like it's never been pounded on.
Most of us get into woodworking from a practical point of view: we need to work on something around the house, so we head to the home center and get tools to break down dimensional lumber and bang it back together. So you upgrade from a circular saw to a compound miter saw, and maybe even get yourself a pocket hole jig so you can hide your hardware from sight.
And then, as it inevitably happens, something changes in your point of view. You're now longer just doing "home improvement" or "building things"... you're now: a woodworker.
Stationary power tools are often the most full-proof way to do a job. They're anchored to the floor or bench, and come with flat tables and fence systems so you can guarantee your cuts, holes, and other bits of shaping are square and straight.
But, besides being expensive, they're not always the right tool for the job. So, instead we turn to handheld tools, both electric and manual, to get things done. And therein lies the rub - human beings are not machines. Try as we might, we often can't do something with our hands as straight or square as a large stationary tool.
Besides using guides and other accuracy aids, there's a super simple and easy trick you can add to your mental toolbox to help guide the tool to do its best.
A few weeks ago, I declared ISOTunes the best headphones for woodworkers and DIYers. They include both audio drivers for sound and 27 dB of OHSA-compliant hearing protection from machine noises in the same package, and after spending all summer testing them out in real world situations, I can't think of a better investment to improve your shop time.
So, I'm pretty excited to share that I've collaborated with ISOTunes to give away three pairs of ISOTunes PRO headphones to ManMade readers.